My '55 Chevy Half-Ton, Converting The Steering to Cross-Steer:

This is the way I originally set it up with a left-side steering system:

I had to fabricate a new steering arm to mount on the right side axle knuckle:

I wanted tapered mounting bolts, the taper of wheel lug nuts will work well for this application:

Here is where I have to mount it:

I have transfer "punched" centermarks onto the right side axle knuckle, now I have to remove the knuckle, drill and tap it, and mount the steering arm:

More Later.

Back to the '55 4x4 Page

Back to the "Too Loose" Home Page

HTML Editor - Flash - Web Hosting
Home of the CoffeeCup HTML Editor